0117 9600 060
Contact us


Home Products

Timber / Cladding Cut End Preserver

  • Regular 5* star ratings as witnessed across a number of online independent distributor websites.
  • Regular 5* star ratings as witnessed across a number of online independent distributor websites.

Swipe to view other images

Timber / Cladding Cut End Preserver






Product description:

Long-lasting end grain protection from rot, fungi & blue stain.

Specially formulated for the treatment of vulnerably exposed end grain. Protects against fungal decay such as wet rot, wood discolouring fungus and wood boring insect attack. Penetrates strongly into end grain wood providing a water-repellent finish. Contains resins and oils to give a long-lasting effect. After application, clean tools immediately after use with Barrettine White Spirit or Brush Cleaner.

  • Protects vulnerably exposed end grain
  • Specially formulated to deeply penetrate and protect cuts and notches in cladding
  • Ideal for cladding & other cut pressure-treated timbers
  • Approved under COPR/BPR 

Size: 1 Litre

DOWNLOADS:

Label PDF DownloadTimber / Cladding Cut End Preserver Label

SDS PDF DownloadTimber / Cladding Cut End Preserver SDS




  • Drying time: 12hrs
  • Application: Brush
  • Coverage: 180ml/m2
  • Active ingredients: Tebuconazole, IPBC and Permethrin.

Apply the product liberally to the end grain and allow it to be absorbed. The ends of the timber can also be stood in Cut End Preserver for an hour to allow the product to deeply penetrate.

Application method: Amateur: BRUSH AND ROLLER. Professional: BRUSH, DIP AND ROLLER.
Protect environment (e.g. Soil, plants, aquatic environment) from splashes.

Amateur / Professional uses: Shake Well
Apply using a synthetic brush designed for solvent-borne products, spreading out evenly, and ensure the end grain is thoroughly treated along with cut and drilled areas. Reseal container after use. It is recommended that a minimum of 2 coats are applied depending on wood species and surface characteristics. Allow 6–12 hours drying time (touch dry) between coats. Application of successive coats will provide a darker finish and on smooth wood a higher sheen finish. If using the Clear Preserver in conjunction with a stain / wood dye it is recommended to apply the colourant before the Preserver, test effect on an off-cut initially. Clean equipment and spills immediately after use with White Spirit
Coverage: Effective against wood destroying fungi, blue stain and wood boring insects at 180 ml/m2.
Drying time: 24 h under normal conditions (20°C/65% rel. humidity). Low temperatures, increased humidity and ingredients of some wood types may increase drying time.


Related products:


Top