Timber / Decking Cut End Preserver
- Regular 5* star ratings as witnessed across a number of online independent distributor websites.
- Regular 5* star ratings as witnessed across a number of online independent distributor websites.
- Regular 5* star ratings as witnessed across a number of online independent distributor websites.
Swipe to view other images
Timber / Decking Cut End Preserver
Product description:
Long-lasting end grain protection from rot, fungi & blue stain.
Formulated to be used on pressure-treated timber where it has been cut, drilled or worked in any way to expose the untreated inner wood. Protects against fungal decay such as wet rot, wood discolouring fungus and wood boring insect attack. Penetrates strongly into end grain wood providing a water repellent finish. Contains resins and oils to give a long-lasting effect. After application, clean tools immediately after use with Barrettine White Spirit or Brush Cleaner.
- Protects vulnerably exposed end grain
- Specially formulated to deeply penetrate and protect cuts and notches
- Ideal for decking & other cut pressure-treated timbers
- Approved under COPR/BPR
Sizes: 1 Litre, 5 Litre
Purchase now from our trusted partners:
Next Day Paint | Buy Now | |
Oakcrafts | Buy Now | |
Toolstation | Buy Now | |
Wickes | Buy Now |
DOWNLOADS:
- Drying time: 12hrs
- Application: Brush
- Coverage: 180ml/m2
- Active ingredients: Tebuconazole, IPBC and Permethrin.
Apply the product liberally to the end grain and allow it to be absorbed. The ends of the timber can also be stood in Cut End Preserver for an hour to allow the product to deeply penetrate.
Application method: Amateur: BRUSH AND ROLLER. Professional: BRUSH, DIP AND ROLLER.
Protect environment (e.g. Soil, plants, aquatic environment) from splashes.
Amateur / Professional uses: Shake Well. Apply using a synthetic brush designed for oil based products, spreading out thinly and evenly, ensure end grain is thoroughly treated along with cut and drilled areas. Reseal container after use. It is recommended that a minimum of 2 coats are applied depending on wood species and surface characteristics. Allow 6–12 hours drying time (touch dry) between coats. Application of successive coats will provide a darker finish and on smooth wood a higher sheen finish. If using the Clear Preserver in conjunction with a stain / wood dye it is recommended to apply the colourant before the Preserver, test effect on an off-cut initially. Before use, test a small inconspicuous area with all products to be used, to ensure a satisfactory final finish and compatibility. Do not use if ambient temperature is below 5°C or humidity is above 80%. Clean tools immediately after use with Barrettine White Spirit or Brush Cleaner.
Related products:
-
-
Armourflex Ultimate UV Protection Oil
-
Clear Universal Wood Preserver (Primer)
-
Timber / Cladding Cut End Preserver