- Nourish & Protect Woodworm Killer 5 L
- Nourish & Protect Woodworm Killer 1 L
- Nourish & Protect Woodworm Killer 2.5 L
- Nourish & Protect Woodworm Killer 250 ml
Swipe to view other images
Barrettine’s Woodworm Treatment is a traditional deep penetrating low odour oil/spirit based woodworm killer. It prevents & exterminates woodworm and wood boring insects such as the woodworm beetle and furniture beetle from treated timber. Ideal for treating furniture, flooring, structural timbers etc. Avoid contact with plastics, roofing felts . Kills all common woodworm insects including Common woodworm Furniture Beetle, House Longhorn Beetle, Powder Post Beetle and wood boring Weevils. Kills woodworm larvae and eggs when in direct contact. Also available in a 500ml woodworm treatment spray.
- For the prevention & eradication of woodworm, wood boring beetles & insects, Larvae and eggs
- For internal & external timber structures
- Low Odour Formulation
250 ml, 500ml, 1 L, 2.5 L & 5 L
- Contains Permethrin.
- Protects uncontaminated timber against wood boring insect attack.
- Suitable for use on all types of timber, rough, sawn or smooth. (Internal & external)
- Treated timbers can be polished, stained, varnished or painted when dry.
- Approved under COPR/BPR • Harmless to plants and pets when dry.
- Deep penetrating low odour solvent based, ready to use formulation.
- Kills all common insects including Common Furniture Beetle, House Longhorn Beetle, Powder Post Beetle and wood boring Weevils.
- Kills larvae and eggs when in direct contact
- Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required).
- Avoid contact with plastics, bitumen roofing felts and similar materials.
- Floor coverings: treated oors must be allowed to dry and ventilate for up to 3 weeks before relaying foam backed carpets or underlay.
- Remove absorbent materials and insulation from roof areas etc before application.
- Ensure all electrical wiring etc are in sound condition before treatment. Isolate the area of treatment from electrical supply by removing fuses before application.
- Brush, spray or apply directly into tight holes where possible.
- Coverage:- Prevention: 200ml per sq metre or 1 litre to 5 sq metres. Eradication: 300ml per sq metre or 1 litre to 3.3 sq metres.
- Drying times: normally 48-72 hours.
- We recommend 2 coats are applied for best results.