Decking Oil All-In-One-Treatment

  • Decking Oil
  • Decking Oil Cedar Red 5 L
  • Decking Oil Clear 5 L
  • Decking Oil Dark Oak 5 L
  • Decking Oil Light Oak 5 L
  • Decking Oil Natural Oak 5 L
  • Decking Oil Rosewood 5 L
  • Decking Oil Rosewood 2.5 L
  • Decking Oil Cedar Red 2.5 L
  • Decking Oil Clear 2.5 L
  • Decking Oil Dark Oak 2.5 L
  • Decking Oil Light Oak 2.5 L
  • Decking Oil Natural Oak 2.5 L

Swipe to view other images

Decking Oil All-In-One-Treatment






Product description:

Nourish & Protect

Specifically formulated for use on pressure treated and preservative impregnated timber offering superb protection to deck boards, deck tiles and balustrades. 

Also achieves a superior finish to summerhouses, sheds and fences. Non-flaking and its water repellency help prevent timber from splitting and cracking.

  • UV fade resistant pigments.
  • Contains a surface biocide preserver to protect against mould. 

Colours:

Decking Oil Swatch Board

The colour swatches are an indication only and representative of the product applied to clean new/pale timber. The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.

 Click through to our distribution partners to purchase: CLICK HERE

An example of the variation in colour of 'Natural Oak' can be seen below on clean new/pale timber (Right) and rough sawn timber (Left).

Rough vs smooth

Size:

2.5 L, 5 L

DOWNOADS:

Label PDF DownloadDecking Oil All-In-One-Treatment Label  (3 MB)





Before & After


  • Oils, Protects and Stains all in one treatment.
  • Built in UV protection.
  • Translucent finish, wood grain pattern is visible.
  • Low odour formulation.
  • Non flaking and its water repellency helps prevent timber splitting and cracking.
  • Dry film preserver helping stop mould and fungi growth.
  • Harmless to plants and pets when dry.
  • Brush or spray application.
  • Available in 5 colours and clear.
  • For unpreserved/untreated timber. We recommend using Barrettine Universal Preserver first as a primer.

  • Ensure wood to be treated is dry, free from dirt and repellent coatings such as paint or varnish (remove and sand down as required).
  • Recommend using a biocidal wash such as Knockout Decking and Patio Cleaner prior to treatment. Allow a minimum of 48 hours to dry.
  • The final colour finish can vary considerably due to the age, type & condition of the timber being treated. We always recommend carrying out a test area first in an inconspicuous area to make sure you are happy with the final dried colour.
  • Brush or spray in suitable conditions. (Make sure weather conditions are dry and still).
  • Coverage 1 coat up to 8 sq metres/litre of smooth timber and up to 5 sq metres on rough sawn timber, 2 coats recommended.
  • Drying times, normally 24-48 hours in ambient temperature. Apply second coat after 48 hours.
  • Clean equipment with Barrettine Brush Cleaner, White Spirit or Bio Spirit.

Related products:


Top