Get 30% Off Armourflex Hard Wax Oil
Date: 27th June 2023
Categories: Barrettine
Armourflex® Hardwax Oil for wooden floors stairs, kitchen worktops & furniture.
Tough on stains, dirt & scratches. Quality results every time.
Armourflex® Hardwax Oil is tough, durable and water-repellent. Containing a blend of natural oils and waxes, suitable for protecting and enhancing the durability of all interior wood surfaces including hardwood, softwood, parquet and veneer. Resistant to common stains such as wine, beer, fruit juice, carbonated soft drinks, tea, and coffee. Food/Toy safe when dry, certified by EN 1186:2002 & EN71:3.
- Natural Oil / Waxed Based
- Stain, Dirt & High Scratch Resistant
- 4 Hour Drying Time
- Certified Food & Toy Safe
- Manufactured in the UK
Sizes: 1 Litre, 2.5 Litre
Celebrating the newly released Armourflex Hardwax Oil, we are offering an opportunity to redeem 30% off the purchase price from our trusted stockists by leaving a review!
PREPARATION
For freshly laid wood, allow to acclimatise in the room for several days before treating. Moisture content should be below 15%. Previous coatings must be fully sanded back before application. Resinous deposits should be removed with a scraper and the surface degreased, with methylated spirits. Repair cracks or open joints with a suitable wood filler. Use 120-150 grit sandpaper to achieve a smooth surface on the wood. Remove any sanding dust thoroughly before application. If required, apply wood dye.
IMPORTANT! Test the colour and compatibility with any wood fillers or dyes on a scrap piece of wood before use.
application
Carry out a test patch before starting any project.
Ensure good ventilation is maintained during application and throughout the drying process. Ready to use, do not thin. Stir thoroughly before use. Apply in thin coats using a short pile roller, good quality brush or lint-free cloth. Over-application can reduce the finish quality and prolong drying time. On previously treated timber 1 coat is normally sufficient, maximum of 2 coats may be required if applying to fresh or previously untreated timber.
Coverage: Approximately 24-28 m2/l (One Coat), 12-16 m2/l (two coats), depending on substrate absorbency and smoothness.
Drying Time: 6-8 hours under average climatic conditions (23oC, 50% humidity). Preferably allow to dry overnight. Variations in ambient conditions and substrate can affect drying times.
Suitable for light foot traffic approximately 16 hours after final coat.
Equipment Cleaning: Clean brushes/rollers with Barrettine White Spirit immediately after use. If spilled, wipe off immediately with a cloth dampened with Barrettine White Spirit.
Precaution: Cloths used for oiling could, under certain conditions, self-combust. Immediately after use, soak them in soapy water then lay them flat outside on a non-combustible surface to dry.
how to apply video
Armourflex Hard Wax Oil is supplied and ready to apply for easy application. Its competitive market pricing makes it accessible and affordable, bringing exceptional protection of internal wooden surfaces to everyone.
Confidence is already growing in this elegant and protective finish and we are keen to hear more feedback on this product, so here is your opportunity!
Please contact us for details and pricing on
T: 0117 9600 060 E: sales@barrettine.co.uk
All press releases